Call for Consultants

ATC is committed to building a workforce that is as diverse as the communities we serve. Are you interested in consulting? Join us!

 

NEWS RELEASE
February 7, 2001

For More Information, Contact:
650/595-1542
This email address is being protected from spambots. You need JavaScript enabled to view it.

At the annual Organizational Board meeting on January 20, 2001, the Applied Technology Council (ATC) Board of Directors elected officers for the Year 2001. Mr. Andrew (Andy) Merovich of A. T. Merovich & Associates, San Rafael, California, was elected President. During his five years on the Board, Andy has served as Secretary-Treasurer, Vice President, and on numerous ATC Board Committees. Succeeding Andy as Vice President is Mr. James Cagley of Cagley & Associates, Rockville, Maryland. Mr. Steve Pelham of Barrish, Pelham & Partners, Sacramento, California, was elected Secretary-Treasurer for a second term.

Board Meeting dates and places were set as follows:

  • April 28, 2001: Atlanta, Georgia (with visits to Georgia Tech laboratories and reception for local engineers and faculty)
  • July 28, 2001: Seattle, Washington (with possible visit to local structural engineering laboratories and reception for local engineers and faculty)
  • October 20, 2001: Sacramento, California (with breakfast meeting for California State agency representatives)
  • Jan 19, 2002 (tentative date): San Francisco, California (Annual and Organizational Meetings)

For more information, contact Gerald Brady at the Applied Technology Council, 555 Twin Dolphin Drive, Suite 550, Redwood City, California 94065; Phone, 650/595-1542; Fax, 650/593-2320; e-mail, This email address is being protected from spambots. You need JavaScript enabled to view it..

Print

 

 Welcome to the ATC Team!

Valley Mike crop As a former Principal at Magnusson Klemencic Associates in Seattle, Mike comes to ATC with more than 30 years of structural engineering experience in new design, evaluation and retrofit of existing buildings, applied research, and codes and standards development. Mike’s design experience includes the landmark Salesforce Tower in San Francisco, and his research and development experience includes the FEMA 356 Prestandard and Commentary for the Seismic Rehabilitation of Buildings, FEMA P-2012 Assessing Seismic Performance of Buildings with Configuration Irregularities (ATC-123 Project), and NIST GCR 10-917-9 Applicability of Nonlinear Multiple-Degree-of-Freedom Modeling for Design (ATC-76-6 Project).

Mike also has extensive experience as an ATC consultant serving as a reviewer, a technical contributor, and Project Director on multiple ATC projects. We look forward to how Mike’s unique experiences as a successful team member will contribute to ATC projects in the future.

Mahoney Mike crop

Retired from federal service as a Senior Geophysicist with the Federal Emergency Management Agency (FEMA), Mike comes to ATC with more than 30 years of experience in hazard mitigation program management and policy development, post-disaster response and recovery, and problem-focused research and development in support of FEMA’s efforts under the National Earthquake Hazards Reduction Program (NEHRP). He has led FEMA’s earthquake-related work with the International Code Council and has been involved with the development of national model codes and standards since 1984.

In his career at FEMA, Mike has led the development of countless major FEMA publications, including: FEMA 350 Recommended Seismic Design Criteria for New Steel Moment-Frame Buildings and its series of companion reports (ATC-41 Project series), FEMA P-58 Seismic Performance Assessment of Buildings, Methodology and Implementation (ATC-58 Project series), FEMA P-695 Quantification of Building Seismic Performance Factors (ATC-63 Project), FEMA P-2018 Seismic Evaluation of Older Concrete Buildings for Collapse Potential (ATC-78 Project), and FEMA P-2090/NIST SP-1254 Recommended Options for Improving the Built Environment for Post-Earthquake Reoccupancy and Functional Recovery Time (ATC-137 Project). With Mike’s extensive knowledge of federal government programs, and past collaboration with state and local agencies, hazard mitigation partners, and code development organizations, we look forward to how his unique experiences will help serve ATC’s client needs and objectives in the future.